Clearaudio BALANCED REFERENCE PHONOSTAGE Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 13
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
Balanced Reference Phonostage
(optional. Incl. ACCU / optional: inkl. AKKU
User Manual/ Bedienungsanleitung
Page/Seite 7 Clearaudio electronic GmbH 2013
Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)9131/ 40 300 100
www.clearaudio.de
www.analogshop.de
Send / ship the equipment always and only in the original packing ! Only in the original packing
clearaudio can provide the warranty.
8. Technical Specification
Power Supply: Input 115 V/230 V selectable by switch inside the
Power supply
Output +/- 10 V and +/- 17 V
Signal to noise ratio: 75 dB(A), G = 60 dB
Channel separation: > 90 dB
Gain / Amplification: (1 kHz) 30 dB - 63 dB select by rotary switch
Clipping limit: (1 kHz) G = 60 dB, 11mV
Distortion: (1 kHz) less than < 0,001 %
Input impedance: Adjustable from 0 Ohms to 47 kOhms
Output impedance: 50 Ohm
System response: RIAA / DIN IEC 98 +/- 0,1 dB tolerance
Frequency response: 10 Hz – 100 kHz / - 0,1 dB
In- and Outputs
XLR:
5-pin Binder-connector:
Power Supply
9-pin. D-SUB-Connector:
Pin 1 = GND (Shield)
Pin 2 = Hot (+)
Pin 3 = Cold (-)
Pin 1 = Hot (+)
Pin 2 = Cold (-)
Pin 3 = GND (Shield)
Pin 4 + 5 = n.c.
Pin 1 = -10 V, Pin 2 = +10 V
Pin 3 = - 17 V, Pin 4 = +17 V, Pin 5 = n.c.
Pin 6 - 9 = GND
Warranty: 5 Years*
* Only if the warranty card is filled out correctly and sent back to Clearaudio within two weeks.
Clearaudio electronic is not responsible for typographical errors in descriptions. Technical
specifications subject to change or improvement without prior notice. Availability as long as stock lasts.
Copies and imprints- also only in extracts – require written conformation through Clearaudio electronic
GmbH; Germany
Clearaudio electronic GmbH 2009
Version: July 2013
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire